Friday, 6 May 2011

The Cycle-Motor Project.

Today marks a break-through in my attempt to build a Cycle-Motor or, as Linda describes it, death-trap.
It now functions perfectly well as a bicycle.

To make it into the finished article the following jobs need to be completed:
  • 01) Connect the electrics up.
  • 02) Fit drive chain (having first purchased around another 6 in. of chain).
  • 03) Fit a longer piece of spark plug cable.
  • 04) Fit anti-fray ferrule on clutch cable.
  • 05) Fit two hose clips to the fuel line.
  • 06) Insert fuel.
With good luck and a fair wind I should be blogging from my hospital bed by Sunday.